Skip to content

Aqua Ultraviolet Commercial Grade UV Sterilizer - 400 Watts - 3"

Original price $3,973.49 - Original price $3,973.49
Original price
$3,973.49
$3,973.49 - $3,973.49
Current price $3,973.49
SKU VIP43

Quick Facts

 

  • Fresh Water Sterilizer 14,400-30,000 gallons
  • Fresh Water Flowrate – 17,500 gph for 30,000 µw/cm2
  • Fresh Water Clarifier to 50,000 gallons
  • Salt Water Sterilizer to 3600 gallons
  • Salt Water Flowrate – 5833 gph for 90,000 µw/cm2

The Viper Series Sterilizers are a perfect chemical-free water disinfection solution for professional applications. UV Sterilization is versatile technology used for disinfecting water, other opaque liquids, hard surfaces and air. Using the same germicidal rays as the sun, but hundreds of times stronger, UV offers a reliable, cost effective, environmentally friendly alternative to chemicals and their resulting bi-products. 

UV Sterilization is a purely physical process so it doesn’t alter water’s chemistry, taste, smell or pH.

The Viper Series UV are ideal for large commercial or residential ponds, aquariums, and water features. The specially designed lamps disinfect faster and have greater cell penetration capability. The compact body design has a small footprint making it easy to handle, install and maintain. Vipers are engineered to accommodate extreme flow rates. A provided flow switch shuts the unit off if flows fall below 95 GPM.

Where do I install my UV?
The best place to install your Viper SL is after the filter and lower than the return water line. If an after the filter installation is not feasible, your sterilizer can be installed before the filter, but consideration must be given to the total dissolved solids in the water that may inhibit UV
transmission.

Do I have to turn my UV off when I clean my filter?
Yes, the Viper SL Units are completely water cooled, and should not be run without water or when water is at a stand still for any length of time. This may cause extensive, irreversible damage to the unit and is not covered under warranty.

Do I install my UV vertically or horizontally?
The Viper SL Ultraviolet Sterilizer must be installed horizontally.

What should my flow rate be on my pond or fresh water aquarium?
The optimum flow rate on your pond or fresh water aquarium is to turn over the volume of water once every hour or a minimum of once every one and one half hours. Please also note the minimum flow rate requirement of 95 gallons per minute.

What should my flow rate be on my salt water aquarium?
Your minimum flow rate should be 3 to 5 times the volume of water per hour. Please also note the minimum flow rate requirement of 95 gallons per minute.

Should I bypass part of my water through the UV and the rest back to the water supply?
No. Our UV’s are specifically designed to handle high flow rates for easier installation and the best water quality.

Is this unit submersible?
Not this specific series.

Does the UV light have any residual effect to the fish?
UV only effects what passes through the chamber. There is no residual effect from UV light.

Does the UV kill good bacteria?
Ultraviolet light does not discriminate about what it destroys. If good bacteria passes by the light it will be destroyed. Beneficial bacteria are colonized in your filter and along the sides and bottom of your pond. The only time these will be affected is if they become free floating. All the bacteria in the filter are safe because UV has no residual.

How often should I change my lamp?
The lamp, quartz sleeve and seals should be replaced after 14 months of continuous use.

Are all UV lamps of the same length the same wattage?
No. The power output of the lamp has nothing to do with its length; other factors like the amount of mercury it contains and the power supply that feeds the lamp govern this.

  • FREE FedEx and UPS GROUND SHIPPING (4-5 DAYS)
  • Ships to: USA (Lower 48 states) 
  • PLEASE NOTE: WE DO NOT SHIP TO ANYWHERE OUTSIDE OF THE CONTINENTAL 48 UNITED STATES
  • Shipping & Return Policy
  • Order Tracking

Due to the Covid-19 pandemic, lead times may be longer than normal. Reach out to our team with any questions. 

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

It's simple! When you order an item from ProtoPond, you unlock free lifetime replacement parts for that item. Whether it's a fountain, aerator, circulator, filtration system, etc., we offer lifetime-guaranteed free replacement parts! If you are a past customer of ours and need to order a replacement part, simply call our office at (515) 635-3182 or email support@protopond.com and one of our team members will assist you with your FREE replacement part.

\

Quick Facts

 

  • Fresh Water Sterilizer 14,400-30,000 gallons
  • Fresh Water Flowrate – 17,500 gph for 30,000 µw/cm2
  • Fresh Water Clarifier to 50,000 gallons
  • Salt Water Sterilizer to 3600 gallons
  • Salt Water Flowrate – 5833 gph for 90,000 µw/cm2

The Viper Series Sterilizers are a perfect chemical-free water disinfection solution for professional applications. UV Sterilization is versatile technology used for disinfecting water, other opaque liquids, hard surfaces and air. Using the same germicidal rays as the sun, but hundreds of times stronger, UV offers a reliable, cost effective, environmentally friendly alternative to chemicals and their resulting bi-products. 

UV Sterilization is a purely physical process so it doesn’t alter water’s chemistry, taste, smell or pH.

The Viper Series UV are ideal for large commercial or residential ponds, aquariums, and water features. The specially designed lamps disinfect faster and have greater cell penetration capability. The compact body design has a small footprint making it easy to handle, install and maintain. Vipers are engineered to accommodate extreme flow rates. A provided flow switch shuts the unit off if flows fall below 95 GPM.

Where do I install my UV?
The best place to install your Viper SL is after the filter and lower than the return water line. If an after the filter installation is not feasible, your sterilizer can be installed before the filter, but consideration must be given to the total dissolved solids in the water that may inhibit UV
transmission.

Do I have to turn my UV off when I clean my filter?
Yes, the Viper SL Units are completely water cooled, and should not be run without water or when water is at a stand still for any length of time. This may cause extensive, irreversible damage to the unit and is not covered under warranty.

Do I install my UV vertically or horizontally?
The Viper SL Ultraviolet Sterilizer must be installed horizontally.

What should my flow rate be on my pond or fresh water aquarium?
The optimum flow rate on your pond or fresh water aquarium is to turn over the volume of water once every hour or a minimum of once every one and one half hours. Please also note the minimum flow rate requirement of 95 gallons per minute.

What should my flow rate be on my salt water aquarium?
Your minimum flow rate should be 3 to 5 times the volume of water per hour. Please also note the minimum flow rate requirement of 95 gallons per minute.

Should I bypass part of my water through the UV and the rest back to the water supply?
No. Our UV’s are specifically designed to handle high flow rates for easier installation and the best water quality.

Is this unit submersible?
Not this specific series.

Does the UV light have any residual effect to the fish?
UV only effects what passes through the chamber. There is no residual effect from UV light.

Does the UV kill good bacteria?
Ultraviolet light does not discriminate about what it destroys. If good bacteria passes by the light it will be destroyed. Beneficial bacteria are colonized in your filter and along the sides and bottom of your pond. The only time these will be affected is if they become free floating. All the bacteria in the filter are safe because UV has no residual.

How often should I change my lamp?
The lamp, quartz sleeve and seals should be replaced after 14 months of continuous use.

Are all UV lamps of the same length the same wattage?
No. The power output of the lamp has nothing to do with its length; other factors like the amount of mercury it contains and the power supply that feeds the lamp govern this.

  • FREE FedEx and UPS GROUND SHIPPING (4-5 DAYS)
  • Ships to: USA (Lower 48 states) 
  • PLEASE NOTE: WE DO NOT SHIP TO ANYWHERE OUTSIDE OF THE CONTINENTAL 48 UNITED STATES
  • Shipping & Return Policy
  • Order Tracking

Due to the Covid-19 pandemic, lead times may be longer than normal. Reach out to our team with any questions. 

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

It's simple! When you order an item from ProtoPond, you unlock free lifetime replacement parts for that item. Whether it's a fountain, aerator, circulator, filtration system, etc., we offer lifetime-guaranteed free replacement parts! If you are a past customer of ours and need to order a replacement part, simply call our office at (515) 635-3182 or email support@protopond.com and one of our team members will assist you with your FREE replacement part.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)