- Quick Facts
- Payment Options
- 1 HP floating aerating fountain, aerates ponds up to 1 acre in size.
- 7 Amps (115V) / 2.5 Amps (230V)
- 17″ minimum depth
- 130 GPM
- Height of Spray: 6′
- Width of Spray: 21′
Bearon Aquatics offers an alternative for those who prefer aesthetics as much as efficient aeration. The F-Series Aerating Fountains provide excellent aeration to any lake or pond while displaying a stunning circular-V shaped pattern. Throwing large goblets of oxygen-depleted water helps expose it to air and transfers it to areas in the pond that are also low on oxygen.
For those keeping a close eye on operating costs, these fountains are comparable to many on the market but use half of the electrical power as most. These lightweight and rugged models can operate in water as shallow as 17”.
- Q: How do I choose a fountain?
- A: This is a loaded question, and the most common one that we get. Our first question would be: is the goal aeration, aesthetics or both? If the goal is aeration or both, we recommend checking out one of our Aerating Fountains. These have a much higher flow rate than our aesthetic fountains and will circulate a larger volume of water. If the goal is aesthetics, there are many different options to discuss. A lot of this will be largely up to you, and what you want it to look like. The biggest things you want to determine are first, that your pond meets the minimum depth requirements and second that the display size isn’t too large for it. We have display dimensions on all fountain product pages.
- Q: If I want to buy a fountain, how do I choose the horsepower?
- A: The horsepower is simply the size of the motor which will determine the size of the spray pattern. You will want to make sure that your pond meets the minimum depth requirements for whatever horsepower you choose, and ensure that the spray won’t be splashing the sides of the pond. Generally, if your pond is a quarter acre or larger, you can fit any of the fountains that we carry (depending on the shape of the pond). The horsepower you choose will depend on how big you want it to look and the budget that you’re working with.
- Q: Do I need to hire someone to install my fountain?
- A: If you do not already have a power source installed by the pond, we strongly advise consulting a licensed electrician to install the power source. Once the power source is installed, installation of our fountains is pretty straightforward. All of our fountains simply float in the middle of the pond, are anchored on two sides by nylon rope and cinder blocks, and plug in via submersible cord to the power source on the edge of the pond. We have many customers that choose to install their own fountains and save money on installation. This of course depends on the resources available to you.
- Q: How do I choose between 110-120V and 220-240V?
- A: A good rule of thumb is: If the power source at the edge of your pond is more than 70 feet from your main breaker, choose 210-240V. You will of course need to ensure that your power source is equipped to accommodate the higher voltage. This will ensure that your fountain gets ample power in order to run consistently. If you choose the lower voltage and the pond is too far away from the main breaker, your fountain will run intermittently, will shut off immediately after turning it on or will not display to its fullest size. Please call us with any questions.
- Q: Are lights automatically included?
- A: Lights are not automatically included. They can be purchased at the same time as your fountain or at a later date. They simply snap on to the floating unit. They are well worth it.
- Q: Why is the power cord so expensive?
- A: This is largely dictated by the cost of materials. Depending on the make of your fountain, the power cord is made of 14-gauge copper or stainless steel wire, all the way down to 4-gauge copper or stainless steel wire (depending on the size of the fountain and length of power cord).
- Q: Can my fountain be left in the water during the winter?
- A: Only Scott Aerator Fountains are built to operate through the winter. They should either be run continuously or shut off entirely for winter months. Once the water thaws, simply turn them back on.
Standard Payment Providers (when ordering through our website)
- American Express
- Diners Club
- Shop Pay
- Apple Pay
- Google Pay
- Amazon Pay
Order now and pay over time with Affirm financing. Split your purchase into 3, 6 or 12 separate payments with rates from 0-36% APR. There is no impact on your credit score to apply.
How to Qualify
- You must be over the age of 18 and reside in the US..
- You need a US shipping address..
Fees or Penalties
- For purchases split into 4 bi-weekly payments, there are no additional charges or interest rates applied. Purchases split into monthly payments may be subject to interest.
- You can pay your balance off early without penalty.
- There are no late fees. However, partial or late payments may affect your ability to use Shop Pay Installments in the future.
Commercial, Government & Organizational Orders
If you are purchasing from us on behalf of an organization including (but not limited to) construction companies, commercial properties, government agencies, living communities such as HOAs and trailer parks, golf courses or other, we are able to accept purchase orders and checks in addition to our online payment providers.
Please note that we will not entertain payment terms above Net 30. If you require a W-9 please contact our office.
Request a Quote
Fill out the form below and we will get back to you promptly.
We partner with the most reliable, quality manufacturers in the pond industry to ensure satisfaction for our customers every time.
At ProtoPond we employ industry experts to guide our customers with candid, consultative advice. Reach out today to speak with one of our team members!
We offer free ground shipping on all orders to the Lower 48 United States. For overnight or international shipments, please reach out for a custom quote.
- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.